Deze website maakt gebruik van cookies
Meer informatie
Akkoord en deze melding verbergen

Stelvoeten, stelelementen

PPRSupport clamp for panels and electro-welded mesh

PPR

PPR

Support clamp for panels and electro-welded mesh

Deze informatie wordt voor u geopend in een nieuw venster / tabblad. Mocht u gebruik maken van een popup-blocker, dan kan het zijn dat dit niet gebeurt.

Volg deze link om de informatie te bekijken: Tekening / Maten

Vibration-damping elements
Made out of NBR rubber, hardness 90 Shore A, supplied assembled.
Standard executions
- PPR: for the mounting of panels, without vibration-damping elements.
- PPR-A: for the mounting of panels, with vibration-damping elements.
- PPR-R: for the mounting of electro-welded mesh type TEC® (max thread diameter 3 mm), without vibration-damping elements.
Material
Glass-fibre reinforced polyamide (PA) SUPER-technopolymer, matte finish, RAL 9005 (C9) black colour or RAL 7040 (C33) grey colour.
Screw and nut
AISI 304 stainless steel M5 thread.
Assembly of the clamp on the profile
Tighten the clamp against the profile and the panel or the electro-welded mesh using the screw and the nut included in the package.
Features and applications
- Assembly on square-section profiles of 25 mm
- Panel drilling is not required for mounting.
- Rubber vibration-damping elements to ensure perfect locking of the panel even if not perfectly in tolerance or in the presence of strong vibrations.
- The distance of 7.5mm of the panel with respect to the profile avoids areas of dirt accumulation.
- Safety in compliance with ISO 13857, paragraph 4.2.4.
- The safety distance (D) is the minimum required distance between the protection structure and the element of the potentially dangerous machine (Fig.1).
Features and applications
- Assembly on square-section profiles of 25 mm
- Panel drilling is not required for mounting.
- Rubber vibration-damping elements to ensure perfect locking of the panel even if not perfectly in tolerance or in the presence of strong vibrations.
- The distance of 7.5mm of the panel with respect to the profile avoids areas of dirt accumulation.
- Safety in compliance with ISO 13857, paragraph 4.2.4.
- The safety distance (D) is the minimum required distance between the protection structure and the element of the potentially dangerous machine (Fig.1).
Assembly of the clamp on the profile
Tighten the clamp against the profile and the panel or the electro-welded mesh using the screw and the nut included in the package.
Code:


ELESA and GANTER models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings.