DIN 319

Vaste handgrepen

__logo__INOX__ __logo__RoHS__

Omschrijving

1Specification

Version in Plastic

Types

  • Type C: with tapped hole, no bush
  • Type E: with tapped bush

Plastic KU

Duroplast (Phenolic PF)

  • Flash removed and polished
  • black
  • red RT, similar RAL 3003: add RT on order code

Bush (Type E)

  • Steel, zinc plated
  • Brass MS add MS on order code (only in black version)

Plastic KT

Technopolymer (Polyamide PA)

  • shock resistant
  • black, matt finish
  • red RT, similar RAL 3000: add RT on order code

Version in Steel

Types

  • Type C: with tapped hole
  • Type K: with plain hole H7

Steel ST

polished

Version in Aluminium

Types

  • Type C: with tapped hole
  • Type K: with plain hole H7

Aluminium AL

polished

Version in Stainless Steel

Types

  • Type C: with tapped hole
  • Type K: with plain hole H7

Stainless Steel AISI 303 NI

matt shot-blasted

Version in Plastic (Press on type)

Types

  • Type L: with tolerance ring
  • Type M: with tapered bore

Type L

Plastic KU

Duroplast (Phenolic PF)

black, shiny finish

Tolerance ring

spring steel

Type M

Plastic KT

Technopolymer (Polyamide PA)

  • shock resistant
  • black, matt finish
2Information

When ball knobs DIN 319 (Press on type) type L and M are used the shaft does not require a thread.

During mounting, easy blows with a soft hammer are sufficient to drive the knob into place, the shaft end should be slightly rounded or chamfered (30°).

Before the assembly of the knobs, type L the tolerance ring is to be inserted into the drilling. Further it is to be noted that the button is put on perpendicular and / or axially parallel. Otherwise the knob may break.

Type M ball knobs are a cheaper solution, however, the pulling off force is less predictable.

3On request
  • Ball knobs press on type in red
4Technical information
  • ISO-Fundamental Tolerances 
  • Stainless Steel characteristics 
  • Plastic characteristics - Duroplast
  • Plastic characteristics - Technopolymer

Scroll horizontaal onderaan de tabel en / of selecteer filters voor het gewenste resultaat

Code

Omschrijving

Aantal

Prijs

Bestel

CAD

d3

h

Gewicht (g)

t2 min

d4 ≈

t1 min

d1

d2

Selecteer
100106510 DIN 319-KT-16-M4-C
€ 0,35
N.v.t. 15 3 N.v.t. 8 6 16 M 4
100106512 DIN 319-KT-16-M5-C
€ 0,48
N.v.t. 15 2 N.v.t. 8 6 16 M 5
100106523 DIN 319-KT-20-M5-C
€ 0,44
N.v.t. 18 5 N.v.t. 12 7.5 20 M 5
100106524 DIN 319-KT-20-M5-E
€ 0,59
M 5 18 8 7.5 12 N.v.t. 20 N.v.t.
100106525 DIN 319-KT-20-M6-C
€ 0,46
N.v.t. 18 5 N.v.t. 12 7.5 20 M 6
100106528 DIN 319-KT-25-M8-C
€ 0,57
N.v.t. 22.5 10 N.v.t. 15 9 25 M 8
100106535 DIN 319-KT-32-M10-C
€ 0,65
N.v.t. 29 22 N.v.t. 18 12 32 M 10
100102658 DIN 319-KT-32-M8-C
€ 0,65
N.v.t. 29 25 N.v.t. 18 12 32 M 8
100106530 DIN 319-KT-32-M8-E
€ 0,96
M 8 29 28 12 18 N.v.t. 32 N.v.t.
100106533 DIN 319-KT-40-M10-C
€ 1,09
N.v.t. 37 41 N.v.t. 22 15 40 M 10
100106534 DIN 319-KT-40-M12-C
€ 1,20
N.v.t. 37 40 N.v.t. 22 15 40 M 12