DIN 319

Vaste handgrepen

__logo__INOX__ __logo__RoHS__

Omschrijving

1Specification

Version in Plastic

Types

  • Type C: with tapped hole, no bush
  • Type E: with tapped bush

Plastic KU

Duroplast (Phenolic PF)

  • Flash removed and polished
  • black
  • red RT, similar RAL 3003: add RT on order code

Bush (Type E)

  • Steel, zinc plated
  • Brass MS add MS on order code (only in black version)

Plastic KT

Technopolymer (Polyamide PA)

  • shock resistant
  • black, matt finish
  • red RT, similar RAL 3003: add RT on order code

Version in Steel

Types

  • Type C: with tapped hole
  • Type K: with plain hole H7

Steel ST

polished

Version in Aluminium

Types

  • Type C: with tapped hole
  • Type K: with plain hole H7

Aluminium AL

polished

Version in Stainless Steel

Types

  • Type C: with tapped hole
  • Type K: with plain hole H7

Stainless Steel AISI 303 NI

matt shot-blasted

Version in Plastic (Press on type)

Types

  • Type L: with tolerance ring
  • Type M: with tapered bore

Type L

Plastic KU

Duroplast (Phenolic PF)

black, shiny finish

Tolerance ring

spring steel

Type M

Plastic KT

Technopolymer (Polyamide PA)

  • shock resistant
  • black, matt finish
2Information

When ball knobs DIN 319 (Press on type) type L and M are used the shaft does not require a thread.

During mounting, easy blows with a soft hammer are sufficient to drive the knob into place, the shaft end should be slightly rounded or chamfered (30°).

Before the assembly of the knobs, type L the tolerance ring is to be inserted into the drilling. Further it is to be noted that the button is put on perpendicular and / or axially parallel. Otherwise the knob may break.

Type M ball knobs are a cheaper solution, however, the pulling off force is less predictable.

3On request
  • Ball knobs press on type in red
4Technical information
  • ISO-Fundamental Tolerances 
  • Stainless Steel characteristics 
  • Plastic characteristics - Duroplast
  • Plastic characteristics - Technopolymer

Scroll horizontaal onderaan de tabel en / of selecteer filters voor het gewenste resultaat

Code

Omschrijving

Aantal

Prijs

Bestel

CAD

t2

d4

h

Gewicht

d1

d3 ≈

Selecteer
100106511 DIN 319-KT-16-B4-M
€ 0,48
9 B 4 15 3 16 8
100106521 DIN 319-KT-20-B5-M
€ 0,57
12 B 5 18 5 20 12
100106522 DIN 319-KT-20-B6-M
€ 0,61
12 B 6 18 5 20 12
100106526 DIN 319-KT-25-B6-M
€ 0,61
16 B 6 22.5 10 25 15
100106527 DIN 319-KT-25-B8-M
€ 0,61
16 B 8 22.5 10 25 15
100106532 DIN 319-KT-32-B8-M
€ 0,94
17 B 8 29 20 32 18
100106531 DIN 319-KT-32-B10-M
€ 0,72
17 B 10 29 20 32 18
100106536 DIN 319-KT-40-B10-M
€ 1,18
22 B 10 37 41 40 22
100106537 DIN 319-KT-40-B12-M
€ 1,18
22 B 12 37 41 40 22