GN 292

Lineaire eenheiden

__logo__INOX__ __logo__RoHS__ * usually not available from stock




  • Type RL1: Shaft journal at one end
  • Type RL2: Shaft journal at both ends

Guide tube

Version in Steel

Tube DIN 2391

Steel, chrome-plated SCR

Version in Stainless Steel*

Tube DIN 2462

Stainless Steel AISI 304 NI

* usually not available from stock

Spindle with trapezoidal thread

Steel respectively

Stainless Steel AISI 303

ball bearing

Lead nut


End cap



In addition to the standard stroke lengths specified in the above table for linear actuators GN 292 any stroke inside the maximum stroke length is available.

Besides the extensive range of tube clamp connectors there are a number of different components for fixing the linear actuators and to build linear actuator connectors.

In order to measure the displacement and positioning of the linear actuator connectors, digital as well as analogue position indicators can be installed and furthermore the guide tube can be provided with a longitudinal scale.

  • Linear actuator connectors, tube clamp connectors and accessory have to be ordered seperately.
4On request
  • Special lengths
5Technical information6Technical description
Ø Linear actuatorFx in NFy in N--Fz in N--Mx in NmMy in NmMz in Nm
l = 500l = 1000l = 1500l = 500l = 1000l = 1500---

The load data are applicable to linear actuators GN 291, GN 292, GN 293 made of Steel (SCR) or Stainless Steel (NI). The specified forces Fy and Fz cause a flexure of the guide tube of approx. 0.5mm.


A lead nut moves in axial direction over the ball bearing trapezodial thread spindle of the linear actuator. The follower ensures the anti-rotation and makes the link to the different linear actuator connectors. The linear actuators have been designed for manual operation (handwheel).

The positioning accuracy is 0.2 mm / 300 mm stroke, the maximum reverse play is 0.1 mm.

Guide tubes are available in chromed Steel (SCR) or Stainless Steel (NI) non-rusting. They made with the tolerance range of precision steel tubes DIN 2391 or DIN 2462.

A wide variety of different components are available in the tube clamp connector program to fix the linear actuators in place and to uprade these into linear actuator connectors.

Also, digital position indicators (DD52R / DD51) may be attached to measure the displacement or the positioning.

In applications where high torsion forces Mx occur, linear actuators with square tubing or double tube linear actuators should be given preference.

A wide variety of different components from the tube clamp connector program is also available for this design. The linear actuator connectors are composed of two-part elements, with the effect that the precision of the square tubes involves no special requirements.


Scroll horizontaal onderaan de tabel en / of selecteer filters voor het gewenste resultaat







Spindel met schroefdraad




d2 f7

Gewicht (g)

max slag







voor sleutel DIN 6885

101717855 GN 292-18-120-RL1-SCR
€ 590,55
TR10x3 M 3 24 n.v.t. 6 440 every 167 18 120* 2xl1+171 16 70 17 A2x2x12
101717860 GN 292-30-130-RL1-SCR
€ 663,40
TR14x4 M 4 38 n.v.t. 8 1250 every 601 30 130* 2xl1+253 16 102.5 23 A2x2x12
101717865 GN 292-40-205-RL1-SCR
€ 784,29
TR20x4 M 5 54 40 12 3130 every 753 40 205* 2xl1+299 17 117.5 42 A4x4x12
101717867 GN 292-40-205-RL2-SCR
TR20x4 M 5 54 40 12 3057 every 753 40 205* 2xl1+299 17 117.5 42 A4x4x12
101717870 GN 292-40-255-RL1-SCR
€ 838,07
TR20x4 M 5 54 40 12 3560 every 753 40 255* 2xl1+299 17 117.5 42 A4x4x12
101717875 GN 292-50-300-RL1-SCR
€ 879,36
TR20x4 M 6 54 n.v.t. 12 6400 every 748 50 300* 2xl1+309 18 120 42 A4x4x12
101717880 GN 292-50-350-RL1-SCR
€ 897,10
TR20x4 M 6 54 n.v.t. 12 6700 every 748 50 350* 2xl1+309 18 120 42 A4x4x12