GN 327

Dichte handwielen

Omschrijving

1Specification

Types

  • Type A: without handle
  • Type D: with revolving handle

Identification no.

  • Version 1: with bearing bush
  • Version 2: with centring ring

Handwheel body

Aluminium

Rim turned and polished

Coupling elements

  • Steel, nitrided
  • Bearing surface ground and / or PTFE-coated
  • Bearing flange blackened

Cylindrical Revolving handles GN 598 

Plastic, Duroplast

black, shiny finish

2Information

Safety handwheels GN 327 feature the ultimate in health and safety at work standards because the handwheel, if disengaged, is mounted on a fixed component, the bearing flange. The wheel is fully disengaged from the rotating shaft.

The bearing flange can also accept the bearing of the shaft via the bearing bushing (code No. 1). This bearing bushing is a dry bearing (DU bushing). Normally, the shaft has a separate bearing and the bearing bushing serves to center the bearing flange.

Centering can also be effected by a centering ring (code No. 2) if the appropriate bore hole has been made at the machine side. In this case there is no need for the bearing bushes and no bearing friction (heating) will occur.

  • Instructions for safety handwheels 
  • Operating instructions for safety handwheels 
3Technical information
  • Keyway P9 DIN 6885 
  • ISO-Fundamental Tolerances 
4Assembly instructions

Shaft bush and countershaft pulley are delivered in two separate components. Before assembly, make sure that the shaft bush can be pushed smoothly and free-moving over the shaft.

Proper function is guaranteed only if:

- shaft bush and bearing surface are level with each other

- the shaft axis lies at a right angle to the bearing surface on the machine side.

Design with bearing bush (Mode 1)

Push the handwheel and the shaft bush at the same time over the shaft, bolt down the bearing flange, and fix the shaft bush axially with the countershaft pulley

Design with centring ring (Mode 2)

The handwheel can be bolted at once through the centring ring above the bearing flange. Then push the shaft bush onto the shaft and fix it axially with the countershaft pulley.

 
 

Scroll horizontaal onderaan de tabel en / of selecteer filters voor het gewenste resultaat

Code

Omschrijving

Aantal

Prijs

Bestel

CAD

Gewicht

d1

l1

B

d2 H7

Selecteer
100307960 GN 327-160-K14-A-1
€ 209,92
1706 160 66 18 K 14
100308020 GN 327-160-K14-A-2
€ 210,90
1702 160 66 18 K 14
100307970 GN 327-160-K16-A-1
€ 209,92
1690 160 66 18 K 16
100308030 GN 327-160-K16-A-2
€ 210,90
1686 160 66 18 K 16
100307980 GN 327-160-K18-A-1
€ 209,92
1670 160 66 18 K 18
100308040 GN 327-160-K18-A-2
€ 210,90
1666 160 66 18 K 18
100308071 GN 327-160-K20-A-1
€ 209,92
1649 160 66 18 K 20
100308072 GN 327-160-K20-A-2
€ 210,90
1645 160 66 18 K 20
100308080 GN 327-200-K14-A-1
€ 218,54
2047 200 68 20.5 K 14
100308140 GN 327-200-K14-A-2
€ 219,54
2043 200 68 20.5 K 14
100308090 GN 327-200-K16-A-1
€ 218,54
2031 200 68 20.5 K 16
100308150 GN 327-200-K16-A-2
€ 219,54
2027 200 68 20.5 K 16
100308100 GN 327-200-K18-A-1
€ 218,54
2011 200 68 20.5 K 18
100308160 GN 327-200-K18-A-2
€ 219,54
2007 200 68 20.5 K 18
100311260 GN 327-200-K20-A-1
€ 218,54
1990 200 68 20.5 K 20
100311270 GN 327-200-K20-A-2
€ 219,54
2000 200 68 20.5 K 20