GN 327

Dichte handwielen

Omschrijving

1Specification

Types

  • Type A: without handle
  • Type D: with revolving handle

Identification no.

  • Version 1: with bearing bush
  • Version 2: with centring ring

Handwheel body

Aluminium

Rim turned and polished

Coupling elements

  • Steel, nitrided
  • Bearing surface ground and / or PTFE-coated
  • Bearing flange blackened

Cylindrical Revolving handles GN 598 

Plastic, Duroplast

black, shiny finish

2Information

Safety handwheels GN 327 feature the ultimate in health and safety at work standards because the handwheel, if disengaged, is mounted on a fixed component, the bearing flange. The wheel is fully disengaged from the rotating shaft.

The bearing flange can also accept the bearing of the shaft via the bearing bushing (code No. 1). This bearing bushing is a dry bearing (DU bushing). Normally, the shaft has a separate bearing and the bearing bushing serves to center the bearing flange.

Centering can also be effected by a centering ring (code No. 2) if the appropriate bore hole has been made at the machine side. In this case there is no need for the bearing bushes and no bearing friction (heating) will occur.

  • Instructions for safety handwheels 
  • Operating instructions for safety handwheels 
3Technical information
  • Keyway P9 DIN 6885 
  • ISO-Fundamental Tolerances 
4Assembly instructions

Shaft bush and countershaft pulley are delivered in two separate components. Before assembly, make sure that the shaft bush can be pushed smoothly and free-moving over the shaft.

Proper function is guaranteed only if:

- shaft bush and bearing surface are level with each other

- the shaft axis lies at a right angle to the bearing surface on the machine side.

Design with bearing bush (Mode 1)

Push the handwheel and the shaft bush at the same time over the shaft, bolt down the bearing flange, and fix the shaft bush axially with the countershaft pulley

Design with centring ring (Mode 2)

The handwheel can be bolted at once through the centring ring above the bearing flange. Then push the shaft bush onto the shaft and fix it axially with the countershaft pulley.

 
 

Scroll horizontaal onderaan de tabel en / of selecteer filters voor het gewenste resultaat

Code

Omschrijving

Aantal

Prijs

Bestel

CAD

l1

l2

Ø hendel

B

d2 H7

Gewicht

r

d1

Selecteer
100308000 GN 327-160-K14-D-1
€ 220,39
66 82.5 26 18 K 14 1820 71 160
100308070 GN 327-160-K14-D-2
€ 221,39
66 82.5 26 18 K 14 1616 71 160
100307990 GN 327-160-K16-D-1
€ 220,39
66 82.5 26 18 K 16 1794 71 160
100308060 GN 327-160-K16-D-2
€ 221,39
66 82.5 26 18 K 16 1790 71 160
100308010 GN 327-160-K18-D-1
€ 220,39
66 82.5 26 18 K 18 1774 71 160
100308050 GN 327-160-K18-D-2
€ 221,39
66 82.5 26 18 K 18 1770 71 160
100308073 GN 327-160-K20-D-1
€ 220,39
66 82.5 26 18 K 20 1753 71 160
100308074 GN 327-160-K20-D-2
€ 221,39
66 82.5 26 18 K 20 150 71 160
100308110 GN 327-200-K14-D-1
€ 229,40
68 82.5 26 20.5 K 14 2151 89 200
100308190 GN 327-200-K14-D-2
€ 230,49
68 82.5 26 20.5 K 14 2147 89 200
100308120 GN 327-200-K16-D-1
€ 229,40
68 82.5 26 20.5 K 16 2135 89 200
100308180 GN 327-200-K16-D-2
€ 230,49
68 82.5 26 20.5 K 16 2131 89 200
100308130 GN 327-200-K18-D-1
€ 229,40
68 82.5 26 20.5 K 18 2117 89 200
100308170 GN 327-200-K18-D-2
€ 230,49
68 82.5 26 20.5 K 18 2113 89 200
100311280 GN 327-200-K20-D-1
€ 229,40
68 82.5 26 20.5 K 20 2094 89 200
100311290 GN 327-200-K20-D-2
€ 230,49
68 82.5 26 20.5 K 20 2090 89 200