GN 492

Lineaire eenheden

** useable depth of thread from both sides min. 2 x d<sub>3</sub> | *** useable depth of thread min. 1.5 x d<sub>4</sub> __logo__RoHS__

Omschrijving

1Specification

Types

  • Type R1: Right hand thread, single shaft end
  • Type R2*: Right hand thread, two shaft ends
  • Type L1*: Left hand thread, single shaft end
  • Type L2*: Left hand thread, two shaft ends

* normally not available from stock

Guide tube DIN 2391

Steel chrome-plated SCR

End pieces / Slider / Adapter plated

Aluminium

plastic coated

black, RAL 9005, textured finish

Fixing surface / mounting surface

machined, blank

Spindle with trapezoidal thread

  • Steel, blank
  • with ball-bearing
  • Positioning accuracy ±0.2 mm/300 mm travel

Follower nut, gun metal

Cylinder head screws DIN 912 /

Hexagon nuts DIN 985

Steel, zinc plated

2Information

In addition to the standard travel lengths specified in the above table for the double tube linear actuator GN 492 any length inside the maximum length is available.

In order to measure the movement and positioning of the sliders, digital position indicators can be added.

3Accessory
  • Installation kits GN 491.1  for position indicators
4Technical information
  • Mounting facilities of end pieces 
  • Technical information / Load data of Double tube linear actuators 
5Mounting facilities

Mounting facilities of the end pieces

Horizontal with screws for thread d4 or bore d5

 

Vertical

From outside, with screws for thread d3

From inside, with screws for bore d6

From inside, with screws for bore d5 / d7

 

Mounting facilities at the slider

Mounting with screws for thread d4 or bore d5

 

Assembly of position indicator and handwheel

Useage of installation kit, position indicator and handwheel (see table).

 
6Technical description
 
dFx in NFy in N for length l =--Fz in N for length l =--MxMyMz
--5001000150050010001500in Nmin Nmin Nm
18425290180-140105-425075
3085015501300800700550250150150200
4011006400340019002400750230180210260
5019007500510027003400850340250350530
602700115009500820075003100610550650980

The specified forces Fy and Fz cause a flexure of the guide tube of approx. 0.5 mm.

Description

The silder is moved cia a bearing-type trapezoidal thread spindle and a aguide nut. The slider is guided through two parallel chrome-plated tubes, resulting in a high load capacity and allowing high bending moments to be compensated by the linear actuator.

For type GN 492, a second slider and an adapter plate extend the options for applications.

These double tube linear actuators have been designed for manual operation (handwheel). With the appropriate lubrication, they can also absorb rotary spindle speed of as much as 250 rpm.

The positioning accuarcy is 0.2 mm / 300 mm travel, the maximum revers play is 0.1 mm.

To measure the adjustment or the positioning, digital position indicators DD52R / DD51 may be attached.

7Designs
 

Scroll horizontaal onderaan de tabel en / of selecteer filters voor het gewenste resultaat

Code

Omschrijving

Aantal

Prijs

Bestel

CAD

max overbrugging

Handwiel

Inlegspie DIN 6885

m10

d3

m2

h3

d4

m5

m7

m9

Gewicht (g)

d8

d6

m6

h5

h6

m3

voor schroef DIN 912

d1

Positie indicator

asdraad

m8

l1

l5

l2

m11

l4

d7

l3

B

d5

h4

m1

h2

s

d2

h1

m4

Selecteer
109555980 GN 492-18-100-R1-SCR
€ 717,02
400 GN 923.18 A2x2x12 68 N.v.t. 68 1 M 5*** N.v.t. 18 4.5 1020 M 5 N.v.t. 20 0.75 8 N.v.t. N.v.t. 18 DD50 TR10x3 N.v.t. 100 80 2xb+l5+l1 52 16 N.v.t. 81 28 5.3 14.5 b+l5+l1 37 8 6 28 20
109555985 GN 492-18-150-R1-SCR
€ 732,79
400 GN 923.18 A2x2x12 68 N.v.t. 68 1 M 5*** N.v.t. 18 4.5 1120 M 5 N.v.t. 20 0.75 8 N.v.t. N.v.t. 18 DD50 TR10x3 N.v.t. 150 80 2xb+l5+l1 52 16 N.v.t. 81 28 5.3 14.5 b+l5+l1 37 8 6 28 20
109555990 GN 492-18-200-R1-SCR
€ 748,55
400 GN 923.18 A2x2x12 68 N.v.t. 68 1 M 5*** N.v.t. 18 4.5 1200 M 5 N.v.t. 20 0.75 8 N.v.t. N.v.t. 18 DD50 TR10x3 N.v.t. 200 80 2xb+l5+l1 52 16 N.v.t. 81 28 5.3 14.5 b+l5+l1 37 8 6 28 20
109555995 GN 492-18-300-R1-SCR
€ 780,09
400 GN 923.18 A2x2x12 68 N.v.t. 68 1 M 5*** N.v.t. 18 4.5 1360 M 5 N.v.t. 20 0.75 8 N.v.t. N.v.t. 18 DD50 TR10x3 N.v.t. 300 80 2xb+l5+l1 52 16 N.v.t. 81 28 5.3 14.5 b+l5+l1 37 8 6 28 20
109556000 GN 492-30-100-R1-SCR
€ 808,15
1500 GN 923.30 A2x2x12 114 M 6** 114 2 M 6*** 35 42 12 4000 M 6 10 30 0.85 10 92 M 6 30 DD51|DD51-E TR14x4 9.5 100 130 2xb+l5+l1 80 16 11 130 50 6.5 27 b+l5+l1 64 10 8 52 30
109556005 GN 492-30-150-R1-SCR
€ 824,41
1500 GN 923.30 A2x2x12 114 M 6** 114 2 M 6*** 35 42 12 4340 M 6 10 30 0.85 10 92 M 6 30 DD51|DD51-E TR14x4 9.5 150 130 2xb+l5+l1 80 16 11 130 50 6.5 27 b+l5+l1 64 10 8 52 30
109556010 GN 492-30-200-R1-SCR
€ 840,70
1500 GN 923.30 A2x2x12 114 M 6** 114 2 M 6*** 35 42 12 4500 M 6 10 30 0.85 10 92 M 6 30 DD51|DD51-E TR14x4 9.5 200 130 2xb+l5+l1 80 16 11 130 50 6.5 27 b+l5+l1 64 10 8 52 30
109556015 GN 492-30-300-R1-SCR
€ 873,29
1500 GN 923.30 A2x2x12 114 M 6** 114 2 M 6*** 35 42 12 4900 M 6 10 30 0.85 10 92 M 6 30 DD51|DD51-E TR14x4 9.5 300 130 2xb+l5+l1 80 16 11 130 50 6.5 27 b+l5+l1 64 10 8 52 30
109556020 GN 492-40-100-R1-SCR
€ 1.021,79
2500 GN 924.40 A4x4x12 160 M 8** 160 3 M 8*** 38 62 12 8650 M 8 13.5 39 1.05 13 132 M 8 40 DD52R|DD52R-E TR20x4 12.5 100 180 2xb+l5+l1 120 17 13.5 180 60 6.5 31.5 b+l5+l1 76 13 12 60 39
109556025 GN 492-40-150-R1-SCR
€ 1.041,58
2500 GN 924.40 A4x4x12 160 M 8** 160 3 M 8*** 38 62 12 9000 M 8 13.5 39 1.05 13 132 M 8 40 DD52R|DD52R-E TR20x4 12.5 150 180 2xb+l5+l1 120 17 13.5 180 60 8.5 31.5 b+l5+l1 76 13 12 60 39
109556030 GN 492-40-200-R1-SCR
€ 1.061,33
2500 GN 924.40 A4x4x12 160 M 8** 160 3 M 8*** 38 62 12 9665 M 8 13.5 39 1.05 13 132 M 8 40 DD52R|DD52R-E TR20x4 12.5 200 180 2xb+l5+l1 120 17 13.5 180 60 8.5 31.5 b+l5+l1 76 13 12 60 39
109556035 GN 492-40-300-R1-SCR
€ 1.100,92
2500 GN 924.40 A4x4x12 160 M 8** 160 3 M 8*** 38 62 12 10150 M 8 13.5 39 1.05 13 132 M 8 40 DD52R|DD52R-E TR20x4 12.5 300 180 2xb+l5+l1 120 17 13.5 180 60 8.5 31.5 b+l5+l1 76 13 12 60 39
109556040 GN 492-50-100-R1-SCR
€ 1.268,74
2630 GN 924.50 A4x4x12 184 M 10** 184 4 M 8*** 50 62 15 14000 M 8 15 46 1.2 16 150 M 8 50 DD52R|DD52R-E TR20x4 13 100 206 2xb+l5+l1 134 18 15 206 72 8.5 38 b+l5+l1 92 13 12 72 46
109556045 GN 492-50-150-R1-SCR
€ 1.290,19
2630 GN 924.50 A4x4x12 184 M 10** 184 4 M 8*** 50 62 15 14440 M 8 15 46 1.2 16 150 M 8 50 DD52R|DD52R-E TR20x4 13 150 206 2xb+l5+l1 134 18 15 206 72 8.5 38 b+l5+l1 92 13 12 72 46
109556050 GN 492-50-200-R1-SCR
€ 1.311,68
2630 GN 924.50 A4x4x12 184 M 10** 184 4 M 8*** 50 62 15 14860 M 8 15 46 1.2 16 150 M 8 50 DD52R|DD52R-E TR20x4 13 200 206 2xb+l5+l1 134 18 15 206 72 8.5 38 b+l5+l1 92 13 12 72 46
109556055 GN 492-50-300-R1-SCR
€ 1.354,52
2630 GN 924.50 A4x4x12 184 M 10** 184 4 M 8*** 50 62 15 16020 M 8 15 46 1.2 16 150 M 8 50 DD52R|DD52R-E TR20x4 13 300 206 2xb+l5+l1 134 18 15 206 72 8.5 38 b+l5+l1 92 13 12 72 46
109556060 GN 492-60-400-R1-SCR
€ 2.194,26
2580 GN 924.60 A5x5x16 216 M 10** 216 2 M 10*** 60 74 16.5 26900 M 10 13.5 55 1.35 16 185 M 10 60 DD52R|DD52R-E TR25x5 14 400 240 2xb+l5+l1 160 19 16.5 240 80 10.5 44 b+l5+l1 106 17 14 86 55
109556065 GN 492-60-500-R1-SCR
€ 2.251,87
2580 GN 924.60 A5x5x16 216 M 10** 216 2 M 10*** 60 74 16.5 28550 M 10 13.5 55 1.35 16 185 M 10 60 DD52R|DD52R-E TR25x5 14 500 240 2xb+l5+l1 160 19 16.5 240 80 10.5 44 b+l5+l1 106 17 14 86 55
109556070 GN 492-60-600-R1-SCR
€ 2.309,49
2580 GN 924.60 A5x5x16 216 M 10** 216 2 M 10*** 60 74 16.5 30200 M 10 13.5 55 1.35 16 185 M 10 60 DD52R|DD52R-E TR25x5 14 600 240 2xb+l5+l1 160 19 16.5 240 80 10.5 44 b+l5+l1 106 17 14 86 55