GN 581

Hijsaccessoires

__logo__RoHS__ __logo__RUD__

Omschrijving

1Specification

Types

  • Type A: without spanner
  • Type B: with spanner

Ring

Steel, German Material No. 1.6541

  • forged
  • high-tensile tempered
  • 100 % electro magnetic tensile tested to EN 1677
  • plastic coated, pink

Bolt

Steel

Tensile strength class 10.9

100 % electro magnetic tensile tested

2Information

The lifting eye bolts GN 581 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye bolts DIN 580 ).

Lifting eye bolts GN 581 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).

The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.

Lifting eye bolts GN 581 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.

The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.

The hexagon socket bolt cannot be removed from the ring.

Type B is suitable for assembly without the need to use tools: inserting the spanner in the hexagon socket of the bolt allows the bolt to be turned in and out by hand.

3Technical information
Method of mounting
Number11222223 and 43 and 43 and 4
Angles of inclination90°90°0° to 45 °45° to 60°asymm.0° to 45°45° to 60°asymm.
Factor11221.4112.11.51
M 60.500.10 t1.000.20 t0.140.10 t0.10 t0.21 t0.15 t0.10 t
M 81.00 [0.14]0.30 t2.00 [0.28]0.60 t0.42 [0.10]0.30 t0.30 t0.63 t0.45 t0.30 t
M 101.00 t [0.23]0.40 t2.00 [0.46]0.80 t0.56 [0.17]0.40 t0.40 t0.84 t0.60 t0.40 t
M 122.00 [0.34]0.75 t4.00 [0.68]1.50 t1.00 [0.24]0.75 t0.75 t1.57 t1.12 t0.75 t
M 164.00 [0.70]1.50 t8.00 [1.40]3.00 t2.12 [0.50]1.50 t1.50 t3.15 t2.24 t1.50 t
M 206.00 [1.20]2.30 t12.00 [2.40]4.60 t3.22 [0.86]2.30 t2.30 t4.83 t3.45 t2.30 t
M 248.00 [1.80]3.20 t16.00 [3.60]6.40 t4.5 [1.29]3.20 t3.20 t6.70 t4.80 t3.20 t
M 3012.00 [3.20]4.50 t24.00 [6.40]9.00 t6.30 [2.30]4.50 t4.50 t9.50 t6.75 t4.50 t
M 3616.0 [4.60]7.00 t32.00 [9.20]14.00 t9.80 [3.30]7.00 t7.00 t14.70 t10.50 t7.00 t
4Safety instructions

The loads given in brackets refer to the load capacity of the corresponding lifting eye bolt DIN 580. If such a value is not indicated the use of the lifting eye bolts DIN 580 is not permitted!

The bolt-on surface for the lifting eye bolts GN 581 must be plane and at a right angle to the threaded borehole; the countersinking must be ≤ the nominal diameter of the thread.

Screwed in, the collar of the screw must make firm contact (do not use washers) and the eye bolt must rotate freely by 360°.

Before applying the load, turn the lifting eye bolt in the direction of the force. The lifting eye bolt is not suitable for frequent rotation cycles under load.

The specified load values apply for a minimum screw-in length of 1.5 × nominal thread diameter in steel with a minimum tensile strength of 37 kp/mm2, at an ambient temperature of – 40° C to + 280° C. Load-bearing capacity under different conditions upon request.

Operating instructions with more details and specifications are included with every delivery (see also www.elesa-ganter.com).

Scroll horizontaal onderaan de tabel en / of selecteer filters voor het gewenste resultaat

Code

Omschrijving

Aantal

Prijs

Bestel

CAD

k1

d3

D1

d4

h

k2

Gewicht (g)

nominale belasting WLL

d1

d5

l

d2

Selecteer
100901605 GN 581-M10-A
€ 58,75
9 25 n.v.t. 30 46 47 120 0.4 t [4.0 kN] M 10 25 15 16
100901615 GN 581-M10-B
€ 66,97
9 25 n.v.t. 30 46 47 140 0.4 t [4.0 kN] M 10 25 15 16
100901625 GN 581-M12-A
€ 64,59
10 30 M12 34 55 56 180 0.75 t [7.5 kN] M12 30 18 20
100901635 GN 581-M12-B
€ 76,32
10 30 M12 34 55 56 200 0.75 t [7.5 kN] M12 30 18 20
100901645 GN 581-M16-A
€ 76,19
13 36 n.v.t. 40 64 65 320 1.5 t [15.0 kN] M 16 35 24 23.5
100901655 GN 581-M16-B
€ 88,51
13 36 n.v.t. 40 64 65 340 1.5 t [15.0 kN] M 16 35 24 23.5
100901656 GN 581-M20-A
€ 100,78
16 41 n.v.t. 50 75 76 490 2.3 t [23.0 kN] M 20 40 30 29
100901657 GN 581-M20-B
€ 115,56
16 41 n.v.t. 50 75 76 510 2.3 t [23.0 kN] M 20 40 30 29
100901658 GN 581-M24-A
€ 138,47
19 51 n.v.t. 60 90 92 900 3.2 t [32.0 kN] M 24 49 36 35
100901661 GN 581-M24-B
€ 154,32
19 51 n.v.t. 60 90 92 920 3.2 t [32.0 kN] M 24 49 36 35
100901662 GN 581-M30-A
€ 196,57
24 66 n.v.t. 75 113 114 1650 4.5 t [45.0 kN] M 30 60 45 44
100901663 GN 581-M30-B
€ 218,85
24 66 n.v.t. 75 113 114 1670 4.5 t [45.0 kN] M 30 60 45 44
100901664 GN 581-M36-A
€ 322,51
29 75 n.v.t. 90 135 135 3100 7.0 t [70.0 kN] M 36 72 54 53
100901665 GN 581-M36-B
€ 346,40
29 75 n.v.t. 90 135 135 3120 7.0 t [70.0 kN] M 36 72 54 53
109556705 GN 581-M6-A
€ 64,81
7 23 n.v.t. 28 37 37 100 0.1 t [1.0 kN] M 6 20 9 13
109556710 GN 581-M6-B
€ 74,86
7 23 n.v.t. 28 37 37 120, 0.1 t [1.0 kN] M 6 20 9 13
100355140 GN 581-M8-A
€ 59,45
9 25 n.v.t. 30 46 47 120 0.3 t [3.0 kN] M 8 25 12 16
100355150 GN 581-M8-B
€ 69,15
9 25 n.v.t. 30 46 47 140 0.3 t [1.0 kN] M 8 25 12 16