GN 586.1

Hijsaccessoires

__logo__INOX__ __logo__RUD__ __logo__RoHS__

Omschrijving

1Specification

Load rings

Steel, German Material No. 1.6541

  • forged
  • high-tensile tempered
  • 100 % electro magnetic tensile tested to EN 1677
  • plastic coated, pink

Fixing holder

  • forged
  • high-tensile tempered
  • 100 % electro magnetic tensile tested
  • plastic coated, pink

Bolt

Steel,

Tensile strength class 10.9 (1000 N/mm2)

Finish: Delta Tone

Bushing

Steel

galvanic zinc plated

2Information

The load rings GN 586.1 can be folded and rotated into all approved directions, carrying the full load in any tension direction

They offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).

The rated load carrying capacity listed in the table is clearly marked on the attachment bolt. It applies to the most unfavourable load application of the load types listed opposite.

Load rings GN 586.1 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.

The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.

This standard replaces the previous load rings GN 586.

3Technical information
Method of mounting
Number11222223 and 43 and 43 and 4
Angles of inclination90°90°0° to 4545° to 60°asymm.0° to 45°45° to 60°asymm.
Factor11221.4112.11.51
M 80.63 t0.63 t1.26 t1.26 t0.88 t0.63 t0.63 t1.26 t0.94 t0.63 t
M 100.90 t0.90 t1.80 t1.80 t1.26 t0.90 t0.90 t1.90 t1.35 t0.90 t
M 121.35 t1.35 t2.70 t1.90 t1.90 t1.35 t1.35 t2.80 t2.00 t1.35 t
M 162.00 t2.00 t4.00 t2.80 t2.80 t2.00 t2.00 t4.20 t3.00 t2.00 t
M 203.50 t3.50 t7.00 t4.90 t4.90 t3.50 t3.50 t7.35 t5.25 t3.50 t
M 244.50 t4.50 t9.00 t6.30 t6.30 t4.50 t4.50 t9.50 t6.75 t4.50 t
M 306.70 t6.70 t13.40 t9.40 t9.40 t6.70 t6.70 t14.00 t10.00 t6.70 t
4Safety instructions

The above details specify the maximum load in metric tonnes, with the rotating load ring GN 586.1 fixed in place and set in load direction.

The contact surface of the rotating load ring GN 586.1 must be flat and at a right angle to the tapped bore.

When fixed to the member, the attachment bolt must be allowed to rotate freely by 360°. Only the hexagonal bolt supplied with the load ring may be used.

The load ring must move freely and must not be supported by edges.

Before applying the load, both the load ring and the attachment bolt must be turned in load direction, observing the permissible loading depending on the direction of the load ring. Rotating load rings are not suitable for frequent rotations under load.

The specified loading values are valid for a minimum bolt embedment depth of 1,5 × nominal thread diameter in steel with a minimum tensile strength of 37 kp/mm2 at an operating temperature of between -40 °C and +100 °C. Load capacities under different conditions provided on request.

Operating instructions with more details and specifications are included with every delivery (see also www.elesa-ganter.com).

 

Scroll horizontaal onderaan de tabel en / of selecteer filters voor het gewenste resultaat

Code

Omschrijving

Aantal

Prijs

Bestel

CAD

k4

k1

k3

h3

D1

nominale belasting in t

k2

AF2

Gewicht (g)

k5

d1

l1

l2

h4

h2

Aanhaalmoment in Nm

d2

r

AF1

h1

Selecteer
100355230 GN 586.1-M10
€ 118,24
75 12 34 39 M 10 0.90 54 6 300 45 M 10 15 30 36 75 60 24 32 17 87
100355231 GN 586.1-M12
€ 120,99
75 12 34 38 M12 1.35 54 8 326 45 M12 18 32 37 75 100 26 32 19 87
100355251 GN 586.1-M16
€ 137,36
86 13.5 36 39 M 16 2.00 56 10 500 47 M 16 22 33 46 85 150 30 38 24 99
100355260 GN 586.1-M20
€ 152,01
113 16.5 54 55 M 20 3.50 82 12 1200 64 M 20 32 50 55 110 250 45 48 30 127
100355271 GN 586.1-M24
€ 157,33
130 18 54 67 M 24 4.50 82 14 1320 78 M 24 37 50 58 125 400 45 48 36 143
470001221 GN 586.1-M30
€ 288,63
151 22.5 65 67 M 30 6.70 103 17 3000 80 M 30 49 60 80 147 500 60 67 46 170
100355229 GN 586.1-M8
€ 120,21
75 12 34 40 M 8 0.63 54 5 300 45 M 8 11 30 35 75 30 24 32 13 87