DIN 6304
Knevelschroeven
Omschrijving
Types
- Type E: without thrust pad
- Type F: with thrust pad DIN 6311
Steel
Tensile strength class 5.8
- blackened
- Thrust point hardened
The thrust point of these screws DIN 6304 is designed to be used with or without a thrust pad for clamping.
The snap ring is a simple and quick method to connect the thrust pad to the tommy screw.
Instead of DIN 6311 a thrust pad GN 6311.1 can be used. In that case the tommy screw and the thrust pad have to be ordered separately
The thrust pad has to be held at an angle allowing the circlip to drop to the bottom of its groove with the split end downwards. The thrust point is then offered up tp the spit end of the circlip at the lowest possible angle and pressed home.
Scroll onderstaande tabel om meer te zien
Code |
Product omschrijving |
Aantal |
Prijs |
Bestel |
CAD |
d2 |
l1 |
d4 h11 |
l3 |
Gewicht (g) |
d1 |
l4 |
d3 |
l2 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Filter |
|
|
|
|
|
|
|
|
|
|||||
100502410 | DIN 6304-M10-60-E |
|
18 | 60 | 8 | 80 | 81 | M 10 | 20 | 8 | 14 | |||
100502420 | DIN 6304-M10-60-F |
|
18 | 60 | 8 | 80 | 100 | M 10 | 20 | 8 | 14 | |||
100502430 | DIN 6304-M10-70-E |
|
18 | 70 | 8 | 80 | 88 | M 10 | 20 | 8 | 14 | |||
100502440 | DIN 6304-M10-70-F |
|
18 | 70 | 8 | 80 | 105 | M 10 | 20 | 8 | 14 | |||
100502450 | DIN 6304-M12-70-E |
|
20 | 70 | 8 | 100 | 138 | M12 | 20 | 10 | 18 | |||
100502460 | DIN 6304-M12-70-F |
|
20 | 70 | 8 | 100 | 171 | M12 | 20 | 10 | 18 | |||
100502470 | DIN 6304-M12-80-E |
|
20 | 80 | 8 | 100 | 146 | M12 | 20 | 10 | 18 | |||
100502480 | DIN 6304-M12-80-F |
|
20 | 80 | 8 | 100 | 179 | M12 | 20 | 10 | 18 | |||
100502530 | DIN 6304-M16-110-E |
|
24 | 110 | 12 | 120 | 292 | M 16 | 20 | 12 | 20 | |||
100502540 | DIN 6304-M16-110-F |
|
24 | 110 | 12 | 120 | 354 | M 16 | 20 | 12 | 20 | |||
100502490 | DIN 6304-M16-75-E |
|
24 | 75 | 12 | 120 | 249 | M 16 | 20 | 12 | 20 | |||
100502500 | DIN 6304-M16-75-F |
|
24 | 75 | 12 | 120 | 260 | M 16 | 20 | 12 | 20 | |||
100502510 | DIN 6304-M16-90-E |
|
24 | 90 | 12 | 120 | 265 | M 16 | 20 | 12 | 20 | |||
100502520 | DIN 6304-M16-90-F |
|
24 | 90 | 12 | 120 | 324 | M 16 | 20 | 12 | 20 | |||
100502590 | DIN 6304-M20-110-E |
|
30 | 110 | 15.5 | 140 | 540 | M 20 | 20 | 16 | 28 | |||
100502600 | DIN 6304-M20-110-F |
|
30 | 110 | 15.5 | 140 | 644 | M 20 | 20 | 16 | 28 | |||
100502550 | DIN 6304-M20-75-E |
|
30 | 75 | 15.5 | 140 | 470 | M 20 | 20 | 16 | 28 | |||
100502560 | DIN 6304-M20-75-F |
|
30 | 75 | 15.5 | 140 | 551 | M 20 | 20 | 16 | 28 | |||
100502570 | DIN 6304-M20-90-E |
|
30 | 90 | 15.5 | 140 | 497 | M 20 | 20 | 16 | 28 | |||
100502580 | DIN 6304-M20-90-F |
|
30 | 90 | 15.5 | 140 | 602 | M 20 | 20 | 16 | 28 | |||
100502330 | DIN 6304-M6-40-E |
|
12 | 40 | 4.5 | 50 | 22 | M 6 | 10 | 5 | 10 | |||
100502340 | DIN 6304-M6-40-F |
|
12 | 40 | 4.5 | 50 | 26 | M 6 | 10 | 5 | 10 | |||
100502350 | DIN 6304-M6-50-E |
|
12 | 50 | 4.5 | 50 | 23 | M 6 | 10 | 5 | 10 | |||
100502360 | DIN 6304-M6-50-F |
|
12 | 50 | 4.5 | 50 | 27 | M 6 | 10 | 5 | 10 | |||
100502370 | DIN 6304-M8-50-E |
|
14 | 50 | 6 | 60 | 40 | M 8 | 15 | 6 | 12 | |||
100502380 | DIN 6304-M8-50-F |
|
14 | 50 | 6 | 60 | 49 | M 8 | 15 | 6 | 12 | |||
100502390 | DIN 6304-M8-60-E |
|
14 | 60 | 6 | 60 | 43 | M 8 | 15 | 6 | 12 | |||
100502400 | DIN 6304-M8-60-F |
|
14 | 60 | 6 | 60 | 52 | M 8 | 15 | 6 | 12 |