Handwielen, handslingers
Knoppen, vleugelmoeren
Klemhendels, verstelbare handgrepen
Beugelgrepen, handgrepen
Vaste, draaiende handgrepen
Bedieningselementen
Indicatoren, klokhandwielen
Blokkeerbouten, drukstukken
Machine elementen
Koppelingen
Stelvoeten, stelelementen
Scharnieren
Vergrendelingen, deursluitingen
Snelspanners, haaksluitingen
Hydrauliek componenten
Tube clamp connectors
Wielen en zwenkwielen
Magneten
Transportband componenten
Lineaire bewegingscomponenten
Omschrijving
Type
Type S: with snap ring
Steel
case hardened
Snap ring
Spring steel wire
Thrust pads DIN 6311 are utilized to transmit clamping forces. They lean to uneven and unparallel surfaces and eliminate the transmission of any screw turning movement to the workpiece.
The thrust pad has to be held at an angle allowing the circlip to drop to the bottom of its groove with the split end downwards. The thrust pin is then offered up top the split end of the circlip at the lowest possbile angle and pressed home.
Uitvoering
Scroll horizontaal onderaan de tabel en / of selecteer filters voor het gewenste resultaat
|
Code |
Omschrijving |
Aantal |
Prijs |
Bestel |
CAD |
d3 |
Gewicht (g) |
d1 |
d2 H12 |
Klemschroef1 |
e ≈ |
h2 |
h1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Selecteer | |||||||||||||
| 100904410 | DIN 6311-12-S | 10 | 4 | 12 | 4.6 | M 6 | 2.2 | 2.5 | 7 | ||||
| 100904420 | DIN 6311-16-S | 12 | 9 | 16 | 6.1 | M 8 | 3 | 4 | 9 | ||||
| 100904430 | DIN 6311-20-S | 15 | 15 | 20 | 8.1 | M 10 | M 12 | 3.6 | 5 | 11 | ||||
| 100904440 | DIN 6311-25-S | 18 | 33 | 25 | 8.1 | M 10 | M 12 | 4.5 | 6 | 13 | ||||
| 100904450 | DIN 6311-32-S | 22 | 59 | 32 | 12.1 | M 16 | 5.3 | 7 | 15 | ||||
| 100904460 | DIN 6311-40-S | 28 | 106 | 40 | 15.6 | M 20 | 5.6 | 9 | 16 | ||||