GN 5860

Hijsaccessoires

__logo__RUD__ __logo__RoHS__

Omschrijving

1Specification

Chain ring

Steel, German Material No. 1.6540

  • high-tensile tempered
  • 100% electro magnetic tensile tested to EN 1677
  • plastic coated, pink

Eye ring

Steel, German Material No. 1.6541

  • forged
  • high-tensile tempered
  • 100 % electro magnetic tensile tested
  • plastic coated, pink

Bearing case

Steel, German Material No. 1.6541

  • forged
  • high-tensile tempered
  • 100 % electro magnetic tensile tested
  • zinc plated, blue passivated

Screw

Steel

Tensile strength class 10.9 (1000 N/mm2)

Finish: Delta Tone

2Information

Load rings GN 5860 rotate running in ball bearings. The freely rotating ring allows the bolts to hold loads in any tensile direction.

The rated load-bearing capacity is shown clearly on the swivel eye bolt. It is valid for the most unfavourable case in term of the types of load listed opposite. Load rings GN 5860 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.

The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.

3Technical information
Method of mounting
Number11222223 and 43 and 43 and 4
Angles of inclination90°90°0° to 45 °45° to 60°asymm.0° to 45°45° to 60°asymm.
Factor11221.4112.11.51
M 80.60 t0.30 t1.20 t0.60 t0.42 t0.30 t0.30 t0.63 t0.45 t0.30 t
M 100.90 t0.45 t1.80 t0.90 t0.63 t0.40 t0.40 t0.94 t0.67 t0.40 t
M 121.20 t0.60 t2.40 t1.20 t0.84 t0.60 t0.60 t1.26 t0.90 t0.60 t
M 162.60 t1.30 t5.20 t2.60 t1.82 t1.30 t1.30 t2.73 t1.95 t1.30 t
M 204.00 t2.00 t8.00 t4.00 t2.80 t2.00 t2.00 t4.25 t3.00 t2.00 t
M 247.00 t3.50 t14.00 t7.00 t4.90 t3.50 t3.50 t7.35 t5.25 t3.50 t
M 3010.00 t5.00 t20.00 t10.00 t7.00 t5.00 t5.00 t10.50 t7.50 t5.00 t
4Safety instructions

The above load capacity table shows the maximum loads in metric tonnes as factor of the load ring type and at an operating temperature range of –40 °C to +100 °C, with a safety coefficient of 4 taken into account for all values.

The load ring GN 5860 may be used only if it is bolted with the minimum screw-in depth which depends on the material and if the bolt contact surface is plane and fixed at a right angle to the tap hole.

If permanently mounted in place, the swivel eye bolt must rotate freely by 360° and must not rest on edges or other fixture, e.g. crane hooks. The load rings are not suitable for permanent rotary movement under load exposure.

Operating insctructions with more details and specification are included with every delivery (see www.elesa-ganter.com).

 
5On request
  • other screw length l

Scroll horizontaal onderaan de tabel en / of selecteer filters voor het gewenste resultaat

Code

Omschrijving

Aantal

Prijs

Bestel

CAD

k4

k1

k3

h3

D1

nominale belasting in t

k2

Gewicht (g)

AF

d1

e

h4

h2

Aanhaalmoment in Nm

l

h1

Selecteer
109531225 GN 5860-M10-17
€ 135,88
44 8 29 31 M 10 0.45 45 205 30 M 10 86 47 78 10 17 86
109531230 GN 5860-M12-21
€ 139,30
65 10 35 49 M12 0.60 55 400 36 M12 117 58 107 10 21 117
109531235 GN 5860-M16-25
€ 148,72
65 13 38 46 M 16 1.30 64 664 41 M 16 126 67 113 30 25 126
109531240 GN 5860-M20-33
€ 239,71
77 13 35 54 M 20 2.00 61 1294 55 M 20 150 83 137 70 33 150
109531245 GN 5860-M24-40
€ 333,13
94 18 40 66 M 24 3.50 76 2647 70 M 24 191 107 173 150 40 191
109531250 GN 5860-M30-50
€ 442,74
126 22 50 90 M 30 5.00 94 4950 85 M 30 243 131 221 225 50 243
109531255 GN 5860-M8-13
€ 128,75
44 8 29 31 M 8 0.30 45 175 28 M 8 84 45 76 10 13 84