GN 5862

Hijsaccessoires

__logo__RUD__ __logo__RoHS__

Omschrijving

1Specification

Hook

Steel, German Material No. 1.6540

  • high-tenisle tempered
  • 100% electro magnetic tensile tested to EN 1677
  • plastic coated, pink

Safety catch

Steel, German Material No. 1.6541

  • forged, high-tensile tempered
  • 100 % electro magnetic tensile tested

Bearing case

Steel 1.6541

  • forged, high-tensile tempered
  • 100 % electro magnetic tensile tested
  • zinc plated, blue passivated

Threaded stud

Steel, high-tensile tempered

Finish: Delta Tone

2Information

Load hooks GN 5862 rotate running in ball bearings. The freely rotating hook allows the bolts to hold loads in any allowed tensile direction.

The rated load-bearing capacity is shown clearly on the swivel eye bolt. It is valid for the most unfavourable case in term of the types of load listed opposite. Load rings GN 5862 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.

The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.

  • Operating instructions GN 5862 
3Technical information
  • Strength values of screws 
Method of mounting
Number11222223 and 43 and 43 and 4
Angles of inclination90°90°0° to 45 °45° to 60°asymm.0° to 45°45° to 60°asymm.
Factor11221.4112.11.51
M 120.63 t0.63 t1.26 t1.26 t0.88 t0.63 t0.63 t1.32 t0.95 t0.63 t
M 161.50 t1.50 t3.00 t3.00 t2.10 t1.50 t1.50 t3.15 t2.25 t1.50 t
M 202.50 t2.50 t5.00 t5.00 t3.50 t2.50 t2.50 t5.25 t3.75 t2.50 t
M 244.00 t4.00 t8.00 t8.00 t5.60 t4.00 t4.00 t8.40 t6.00 t4.00 t
M 306.70 t5.00 t13.40 t10.00 t7.00 t5.00 t5.00 t10.50 t7.50 t5.00 t
M 3610.00 t8.00 t20.00 t16.00 t11.20 t8.00 t8.00 t16.80 t12.00 t8.00 t
4Safety instructions

The above load capacity table shows the maximum loads in metric tonnes as factor of the load ring type and at an operating temperature range of –40 °C to +200 °C, with a safety coefficient of 4 taken into account for all values.

The load hooks GN 5862 may be used only if it is bolted with the minimum screw-in depth which depends on the material and if the bolt contact surface is plane and fixed at a right angle to the tap hole.

If permanently mounted in place, the load hooks must rotate freely by 360° and must not rest on edges or other fixture, e.g. crane hooks. The load hooks are not suitable for permanent rotary movement under load exposure.

Operating instructions with more details and specifications are included with every delivery (see www.elesa-ganter.com)

 
5On request
  • other screw lengths l

Scroll horizontaal onderaan de tabel en / of selecteer filters voor het gewenste resultaat

Code

Omschrijving

Aantal

Prijs

Bestel

CAD

c

k4

k1

k3

h3

D1

nominale belasting in t

k2

Gewicht (g)

h5

d1

e

h4

h2

Aanhaalmoment in Nm

s

l

d2

h1

Selecteer
470001222 GN 5862-M12-18
€ 183,27
18 82 12 25 75 M12 0.63 52 400 49 M12 40 41 116 10 36 18 4.8 129
470001223 GN 5862-M16-24
€ 230,06
25 105 16 32 97 M 16 1.50 73 820 63 M 16 46 50 147 30 41 24 7.4 167
470001224 GN 5862-M20-30
€ 288,46
30 136 20 42 126 M 20 2.50 95 1200 78 M 20 61 61 187 70 55 30 9.6 215
470001225 GN 5862-M24-36
€ 402,49
35 163 26 52 150 M 24 4.00 118 1600 96 M 24 87 77 227 150 70 36 12.1 263
470001226 GN 5862-M30-45
€ 586,77
40 189 30 57 174 M 30 5.00 135 2400 119 M 30 95 93 267 225 85 45 15.6 304
470001227 GN 5862-M36-54
€ 927,09
48 227 36 68 208 M 36 8.00 161 3200 137 M 36 100 102 310 410 90 54 19 356